iologik-e1242-bo-io-cong-nghiep-2-cong-ethernet-gia-re-dai-ly-moxa-viet-nam-1.png

ioLogik E1242: Bộ IO công nghiệp 2 cổng Ethernet giá rẻ, Đại Lý Moxa Việt Nam

  • Hoạt động môi trường chống cháy nổ khu vực 2
  • Người dùng xác định địa chỉ Modbus TCP slave
  • Hỗ trợ 2 cổng Ethernet kết nối liên tiếp
  • Hỗ trợ ứng dụng Restful API (IIoT)
  • Hỗ trợ SNMP v1/v2c
NAME TYPE VERSION OPERATING SYSTEM

MXconfig plugin

2.2 MB
Software Package v1.1
  • Windows 10
  • Windows 7
  • Windows 8
Show More

Moxa CLI Configuration Tool for Windows

2.1 MB
Utility v1.2
  • Windows 10
  • Windows 7
  • Windows 8
Show More

Moxa CLI Configuration Tool for Linux

8.1 MB
Utility v1.2
  • Linux Kernel 2.6.x
  • Linux Kernel 3.x
  • Linux Kernel 4.x

EDS file for ioLogik E1214

42.0 KB
Software Package v1.3

 

Chúng tôi, Đại lý Moxa Tại Việt Nam và là nhà cung cấp thiết bị công nghiệp với các loại cảm biến tiêu chuẩn cao trong công nghiêp. Sẵn sàng hỗ trợ giải đáp các thắc mắc và cung cấp giải pháp tối ưu nhất đến cho khách hàng.

Liên hệ ngay : 0918364352 để báo giá tốt và nhanh nhất.

• Inputs and Outputs
Digital Inputs 4 channels
Configurable DIOs (by jumper) 4 channels
Analog Inputs 4 channels
Isolation 3k VDC or 2k Vrms
• Digital Input
Sensor Type Wet Contact (NPN or PNP), Dry Contact
I/O Mode DI or Event Counter
Dry Contact • On: short to GND
• Off: open
Wet Contact (DI to COM) • On: 10 to 30 VDC 
• Off: 0 to 3 VDC
Common Type 4 points per COM
Counter Frequency 250 Hz
Digital Filtering Time Interval Software Configurable
• Digital Output
Type Sink
I/O Mode DO or Pulse Output
Pulse Output Frequency 500 Hz
Over-Voltage Protection 45 VDC
Over-Current Protection 2.6 A (4 channels @ 650 mA)
Over-Temperature Shutdown 175°C (typical), 150°C (min.)
Current Rating 200 mA per channel
• Analog Input
Type Differential input
Resolution 16 bits
I/O Mode Voltage / Current (jumper selectable)
Input Range 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection)
Accuracy ±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Sampling Rate • All channels: 12 samples/sec
• Per channel: 3 samples/sec
• Only one channel enabled: 12 samples/sec
Input Impedance 10 mega-ohms (min.)
Built-in Resistor for Current Input 120 ohms
• Power Requirements
Input Voltage 12 to 36 VDC
Input Current 139 mA @ 24 VDC
• MTBF (mean time between failures)
Time 502,210 hrs
Standard Telcordia SR332

Common Specifications

• LAN
Ethernet 2 switched 10/100 Mbps RJ45 ports
Protection 1.5 kV magnetic isolation
Protocols Modbus/TCP (Slave), EtherNet/IP*, SNMPv1/v2c, RESTful API, TCP/IP, UDP, DHCP, BOOTP, HTTP
 
• Physical Characteristics
Wiring I/O cable max. 14 AWG
Dimensions 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight Under 200 g (0.44 lb)
Mounting DIN rail or wall
• Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Altitude Up to 2000 m
   
• Standards and Certifications
Safety UL 508
EMC EN 55032, EN 55024, EN 61000-3-2/3-3, EN 61000-6-2/6-4
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Hazardous Location Class 1 Division 2, ATEX Zone 2
Green Product RoHS, CRoHS, WEEE
Note Please check Moxa’s website for the most up-to-date certification status.