Mr DuyMoxa Việt Nam giới thiệu:
NPort 5110A/NPort 5130A/NPort 5150A Series
Bài viết: Hướng dẫn cấu hình thiết bị NPort 5110A/NPort 5130A/NPort 5150A (Nhấn vào đây)
Bài viết: Hướng dẫn cách chọn đúng chế độ hoạt động cho Nport (Nhấn vào đây)
Bài viết: Khi nào cần mở rộng cổng COM port kết nối nhiều máy tính cùng lúc (Nhấn vào đây)
Bài viết: Chọn thiết bị Nport nào cho ứng dụng của bạn (Nhấn vào đây)
Bài viết: Sự khác nhau giữa Nport và Mgate-Gateway (Nhấn vào đây)
Tham gia Group Facebook: "Những người làm mạng công nghiệp" (Nhấn vào đây)
Bài Viết: .PNG)
Features and Benefits
-
Only 1 W power consumption
-
Speedy 3-step web-based configuration
-
Surge protection for serial, Ethernet, and power lines
-
COM port grouping and UDP multicast applications
-
Screw connectors for secure installation
-
Real COM/TTY drivers for Windows and Linux
-
Standard TCP/IP interface and versatile TCP and UDP operation modes
-
Connect up to 8 TCP hosts
Overview
The NPort® 5150A Moxa việt nam device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5100A moxa viet nam device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.
A Greener Serial-to-Ethernet Solution
The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort® 5110A series becomes the world’s only device server with power consumption less than 1 W. The NPort® 5100A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.
Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort® 5100A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.
3-step Web-based Configuration
The NPort® 5100A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort® 5100A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort.
Easy to Troubleshoot
NPort® 5100A, Nport 5110A Moxa Việt Nam device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change.
Dimensions
.jpg)
Pin Assignment
| Ethernet Interface | |
| Number of Ports | 1 |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Connector | 8-pin RJ45 |
| Magnetic Isolation Protection | 1.5 kV built-in |
| • Serial Interface | |
| Number of Ports | 1 |
| Serial Standards | NPort 5110A: RS-232 NPort 5130A: RS-422/485 NPort 5150A: RS-232/422/485 |
| Connector | DB9 male |
| Serial Line Protection | Level 1 surge, EN 61000-4-5 |
| RS-485 Data Direction Control | ADDC® (Automatic Data Direction Control) |
| Pull High/Low Resistor for RS-485 | 1 kΩ, 150 kΩ |
| • Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF |
| Baudrate | Supports standard baudrates (unit=bps):50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k |
| • Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| • Software | |
| Network Protocols | ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, ARP |
| Configuration Options | Web Console (with new Quick Setup), Serial Console (NPort 5110A/5150A only), Telnet Console, Windows Utility |
| Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
| Linux Real TTY Drivers | Linux 2.4.x, 2.6.x, 3.x, 4.x |
| Android API | Android 3.1.x and later |
| • Physical Characteristics | |
| Housing | Metal |
| Weight | 340 g (0.75 lb) |
| Dimensions | Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in) With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 75°C (-40 to 167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Input Current | NPort 5110A: 82.5 mA @ 12 VDC NPort 5130A: 89.1 mA @ 12 VDC NPort 5150A: 92.4 mA @ 12 VDC |
| • Standards and Certifications | |
| Safety | UL 60950-1 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 0.5 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4 |
| • Reliability | |
| Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
| • MTBF (mean time between failures) | |
| Time | 2,231,530 hrs |
| Standard | Telcordia (Bellcore) Standard TR/SR |
Available Models
| Model No. | Description | |
|---|---|---|
| NPort 5110A | 1-port RS-232 device server, 0 to 60°C operating temperature | |
| NPort 5110A-T | 1-port RS-232 device server, -40 to 75°C operating temperature | |
| NPort 5130A | 1-port RS-422/485 device server, 0 to 60°C operating temperature | |
| NPort 5130A-T | 1-port RS-422/485 device server, -40 to 75°C operating temperature | |
| NPort 5150A | 1-port RS-232/422/485 device server, 0 to 60°C operating temperature | |
| NPort 5150A-T | 1-port RS-232/422/485 device server, -40 to 75°C operating temperature |
Optional Accessories
Trial Software
| Model No. | Description | |
|---|---|---|
| MXview | Industrial network management software designed for converged automation networks |
Power Adaptors
| Model No. | Description | |
|---|---|---|
| PWR-12150-USJP-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, US/JP plug | |
| PWR-12150-EU-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, EU plug | |
| PWR-12150-UK-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, UK plug | |
| PWR-12150-CN-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, CN Plug | |
| PWR-12150-AU-SA-T | 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, AU plug | |
| CBL-PJ21NOPEN-BK-30 | Locking barrel plug to bare wires cable | |
| PWR-12050-WPEU-S1 | Locking barrel plug, 12VDC 0.5A, 100-240VAC with Continental European (EU) Plug, 0 to 40°C | |
| PWR-12050-WPUSJP-S1 | Locking barrel plug, 12VDC 0.5A, 100-240VAC with US/JP Plug, 0 to 40°C | |
| PWR-12050-WPUK-S1 | Locking barrel plug, 12VDC 0.5A, 100-240VAC with United Kingdom (UK) Plug, 0 to 40°C | |
| PWR-12050-WPCN-S1 | Locking barrel plug, 12VDC 0.5A, 100-240VAC with China (CN) Plug, 0 to 40°C | |
| PWR-12050-WPAU-S1 | Locking barrel plug, 12VDC 0.5A, 100-240VAC with Australian (AU) Plug, 0 to 40°C |
