MGate 5109-T: Bộ chuyển đổi 1 cổng Modbus-to-DNP3 Gateway,-40 đến 75°C, Moxa Việt Nam, Moxa-STC Việt Nam

Đại Diện Ủy Quyền Moxa Tại Việt Nam

Giới thiệu:

MGate 5109-T Bộ chuyển đổi 1 cổng Modbus-to-DNP3 Gateway, nhiệt độ hoạt động -40 đến 75°C của hãng Moxa-Taiwan hiện đang được Moxa Việt Nam  phân phối rộng rãi tại thị trường Việt Nam. Mgate-5109-T được thiết kế theo tiêu chuẩn công nghiệp, dễ dàng kết nối với các hệ thống giám sát DCS, PLC, máy tính nhúng,...Sản phẩm hiện đang được sử dụng cho các ứng dụng truyền thông IIoT của các ngành: Dầu khí, Điện lực, Sân Bay, Năng Lượng mặt trời, quan trắc thời tiết, khí tượng thủy văn, giao thông-đô thị thông minh.

Tính năng của sản phẩm:

• Supports Modbus RTU/ASCII/TCP master/client and slave/server
• Supports DNP3 serial/TCP/UDP master and outstation (Level 2)
• DNP3 master mode supports up to 26600 points
• Supports time-synchronization through DNP3
• Effortless configuration via web-based wizard
• Built-in Ethernet cascading for easy wiring
• Embedded traffic monitoring/diagnostic information for easy troubleshooting
• microSD card for configuration backup/duplication and event logs
• Status monitoring and fault protection for easy maintenance
• Redundant dual DC power inputs and relay output
• -40 to 75°C wide operating temperature models available
• Serial port with 2 kV isolation protection
• Security features based on IEC 62443

Standards and Certifications

• Safety : EN 60950-1, UL 508
• EMC : EN 55032/24
• EMI : CISPR 32, FCC Part 15B Class B
• EMS : IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
  IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
  IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
  IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
  IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
  IEC 61000-4-8 PFMF
• Hazardous Locations : ATEX, Class I Division 2, IECEx
• Freefall : IEC 60068-2-32
• Shock : IEC 60068-2-27
• Vibration : IEC 60068-2-6, IEC 60068-2-64

MTBF

• oTime : 888,926 hrs

Thông số kỹ thuật của sản phẩm:

Ethernet Interface

• 10/100BaseT(X) Ports (RJ45 connector) : 2
  Auto MDI/MDI-X connection
• Magnetic Isolation Protection :

Ethernet Software Features

• Industrial Protocols : Modbus TCP Client (Master), Modbus TCP Server (Slave), DNP3 TCP Master, DNP3 TCP Outstation
• Configuration Options : Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
• Management : ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
• MIB : RFC1213, RFC1317
• Time Management : NTP Client

Serial Interface

• Console Port : RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
• : 1
• Connector : DB9 male
• Serial Standards : RS-232/422/485
• Baudrate : 50 bps to 921.6 kbps
• Data Bits : 7, 8
• Parity : None, Even, Odd, Space, Mark
• Stop Bits : 1, 2
• Flow Control : RTS Toggle (RS-232 only), RTS/CTS
• RS-485 Data Direction Control : ADDC® (automatic data direction control)
• Pull High/Low Resistor for RS-485 : 1 kilo-ohm, 150 kilo-ohms
• Terminator for RS-485 : 120 ohms
• Isolation : 2 kV (built-in)

Serial Signals

• RS-232 : TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• RS-422 : Tx+, Tx-, Rx+, Rx-, GND
• RS-485-2w : Data+, Data-, GND
• RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND

Serial Software Features

• Configuration Options : Serial Console
• Industrial Protocols : Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, DNP3 Serial Master, DNP3 Serial Outstation

Modbus RTU/ASCII

• Mode : Master, Slave
• Functions Supported : 1, 2, 3, 4, 5, 6, 15, 16, 23
• : 100

Modbus TCP

• Functions Supported : 1, 2, 3, 4, 5, 6, 15, 16, 23
• Mode : Client (Master), Server (Slave)
• : 16
• : 32
• : 100

DNP3 (Transparent)

• : 16
• : 32

DNP3 Serial

• Mode : Master, Outstation
• : 1
• : 31
• Internal Master Database (each Master) : Binary Inputs: 8192 points
  Analog Inputs: 2048 points
  Counters: 2048 points
  Binary Outputs: 8192 points
  Analog Outputs: 2048 points
• Internal Outstation Database : Binary Inputs: 8192 points
  Analog Inputs: 2048 points
  Counters: 2048 points
  Binary Outputs: 8192 points
  Analog Outputs: 2048 points
  Binary Input Events: 1024
  Analog Input Events: 1024
  Counter Events: 1024

DNP3 TCP/UDP

• Mode : Master, Outstation
• : 1
• : 32
• Internal Master Database (each Master) : Binary Inputs: 8192 points
  Analog Inputs: 2048 points
  Counters: 2048 points
  Binary Outputs: 8192 points
  Analog Outputs: 2048 points
• Internal Outstation Database : Binary Inputs: 8192 points
  Analog Inputs: 2048 points
  Counters: 2048 points
  Binary Outputs: 8192 points
  Analog Outputs: 2048 points
  Binary Input Events: 1024
  Analog Input Events: 1024
  Counter Events: 1024

Power Parameters

• Input Voltage : 12 to 48 VDC
• Input Current : 455 mA @ 12 VDC
• Power Connector : Screw-fastened Euroblock terminal

Relays

• Contact Current Rating : Resistive load: 2 A @ 30 VDC

Physical Characteristics

• Housing : Metal
• IP Rating : IP30
• Dimensions : 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
• Weight : 507 g (1.12 lb)

Environmental Limits

• Operating Temperature : -40 to 75°C (-40 to 167°F)
• Storage Temperature (package included) : -40 to 85°C (-40 to 185°F)
• Ambient Relative Humidity : 5 to 95% (non-condensing)

Standards and Certifications

• Safety : EN 60950-1, UL 508
• EMC : EN 55032/24
• EMI : CISPR 32, FCC Part 15B Class B
• EMS : IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
  IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
  IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
  IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
  IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
  IEC 61000-4-8 PFMF
• Hazardous Locations : ATEX, Class I Division 2, IECEx
• Freefall : IEC 60068-2-32
• Shock : IEC 60068-2-27
• Vibration : IEC 60068-2-6, IEC 60068-2-64

MTBF

• oTime : 888,926 hrs