AWK-1137C-EU: Bộ Wireless Công Nghiệp giá rẻ nhất, Đại Lý Moxa Việt Nam
Xuất sứ: Taiwan
Nhà cung cấp: STC Việt Nam
Hãng sản xuất: Moxa Inc
Ứng dụng sản phẩm: 3. Thiết bị mạng không dây công nghiệp - Single-Radio Wireless AP/Bridge/Client – Rail Wireless LAN
AWK-1137C-EU: Bộ Wireless Công Nghiệp giá rẻ nhất, Đại Lý Moxa Việt Nam
AWK-1137C là một giải pháp khách hàng lý tưởng cho các ứng dụng di động không dây công nghiệp. Nó cho phép kết nối WLAN cho cả Ethernet và các thiết bị nối tiếp, đồng thời tuân thủ các tiêu chuẩn và phê duyệt công nghiệp bao gồm nhiệt độ hoạt động, điện áp đầu vào nguồn, tăng, ESD và rung. AWK-1137C có thể hoạt động trên băng tần 2,4 hoặc 5 GHz và tương thích ngược với các triển khai 802.11a / b / g hiện có để đảm bảo các khoản đầu tư không dây của bạn trong tương lai. Tiện ích bổ sung Không dây cho tiện ích quản lý mạng MXview hiển thị các kết nối không dây vô hình của AWK để đảm bảo kết nối Wi-Fi xuyên tường.
- Client tuân thủ IEEE 802.11a/b/g/n
- Các giao diện toàn diện với 1 cổng serial và 2 cổng LAN Ethernet
- Turbo Roaming cấp mili giây dựa trên client
- Công nghệ tương lai MIMO 2×2
- Tích hợp ăng ten và cách ly nguồn điện
- Thiết kế chống rung
- Kích thước phù hợp cho các ứng dụng công nghiệp của bạn
- Dễ dàng cài đặt, triển khai với AeroMag
NAME | TYPE | VERSION | RELEASE DATE |
---|---|---|---|
620.8 KB | QIG | v7.1 | May 06, 2021 |
Datasheet for AWK-1137C Series 1.0 MB |
Datasheet | v1.8 | Apr 01, 2021 |
5.4 MB | Manual | v6.0 | Apr 01, 2021 |
112.8 KB | 2D CAD | Nov 24, 2017 |
Chúng tôi, Đại diện Thương Hiệu Moxa Tại Việt Nam và là nhà cung cấp thiết bị công nghiệp với các loại cảm biến tiêu chuẩn cao trong công nghiêp.
Sẵn sàng hỗ trợ giải đáp các thắc mắc và cung cấp giải pháp tối ưu nhất đến cho các bạn.
WLAN Interface
- WLAN Standards : 802.11a/b/g/n
802.11i Wireless Security - Modulation Type : DSSS
OFDM
MIMO-OFDM - Frequency Band for US (20 MHz operating channels) : 2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.745 to 5.825 GHz (5 channels) - Frequency Band for EU (20 MHz operating channels) : 2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. - Frequency Band for JP (20 MHz operating channels) : 2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. - Wireless Security : WEP encryption (64-bit and 128-bit)
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2-Personal - Transmission Rate : 802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps - Transmitter Power for 802.11a : 23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
20±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps - Transmitter Power for 802.11n (5 GHz) : 23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
18±1.5 dBm @ MCS7/15 40 MHz - Transmitter Power for 802.11b : 26±1.5 dBm @ 1 Mbps
26±1.5 dBm @ 2 Mbps
26±1.5 dBm @ 5.5 Mbps
25±1.5 dBm @ 11 Mbps - Transmitter Power for 802.11g : 23±1.5 dBm @ 6 to 24 Mbps
22±1.5 dBm @ 36 Mbps
20±1.5 dBm @ 48 Mbps
19±1.5 dBm @ 54 Mbps - Transmitter Power for 802.11n (2.4 GHz) : 23±1.5 dBm @ MCS0/8 20 MHz
17±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz - Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) : Typ. -69 dBm @ MCS7 20 MHz
Typ. -70 dBm @ MCS15 20 MHz
Typ. -64 dBm @ MCS7 40 MHz
Typ. -66 dBm @ MCS15 40 MHz
Note Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications. - Receiver Sensitivity for 802.11b (measured at 2.437 GHz) : Typ. -89 dBm @ 1 Mbps
Typ. -89 dBm @ 2 Mbps
Typ. -89 dBm @ 5.5 Mbps
Typ. -88 dBm @ 11 Mbps - Receiver Sensitivity for 802.11g (measured at 2.437 GHz) : Typ. -88 dBm @ 6 Mbps
Typ. -88 dBm @ 9 Mbps
Typ. -88 dBm @ 12 Mbps
Typ. -87 dBm @ 18 Mbps
Typ. -84 dBm @ 24 Mbps
Typ. -81 dBm @ 36 Mbps
Typ. -77 dBm @ 48 Mbps
Typ. -75 dBm @ 54 Mbps - Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz) : Typ. -70 dBm @ MCS7 20 MHz
Typ. -70 dBm @ MCS15 20 MHz
Typ. -64 dBm @ MCS7 40 MHz
Typ. -65 dBm @ MCS15 40 MHz - WLAN Operation Mode : Client, Client-Router, Slave, Sniffer
- Antenna : External, 2/2 dBi, Omni-directional
- Antenna Connectors : 2 RP-SMA female
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector) : 2
- Standards : IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.1Q for VLAN Tagging
Ethernet Software Features
- Management : DHCP Server/Client, HTTP, IPv4, LLDP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Proxy ARP, VLAN, Wireless Search Utility, MXview, MXconfig
- Routing : Port forwarding, Static Route, NAT
- Security : HTTPS/SSL, RADIUS, SSH
- Time Management : NTP Client, SNTP Client
Firewall
- Filter : ICMP, MAC address, IP protocol, Port-based
Serial Interface
- Connector : DB9 male
- Serial Standards : RS-232, RS-422/485, RS-232/422/485
- Operation Modes : Disabled, Real COM, RFC2217, TCP Client, TCP Server, UDP
- Data Bits : 5, 6, 7, 8
- Stop Bits : 1, 1.5, 2
- Parity : None, Even, Odd, Space, Mark
- Flow Control : None, RTS/CTS, XON/XOFF
- Baudrate : 75 bps to 921.6 kbps
- Serial Data Log : 256 KB
Serial Signals
- RS-232 : TxD, RxD, RTS, CTS, DCD, GND, DTR, DSR
- RS-422 : Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w : Data+, Data-, GND
- RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND
LED Interface
- LED Indicators : SYS, LAN1, LAN2, WLAN, Serial
Input/Output Interface
- Buttons : Reset button
Physical Characteristics
- Housing : Metal
- IP Rating : IP30
- Dimensions : 77.1 x 115.5 x 26 mm (3.04 x 4.55 x 1.02 in)
- Weight : 470 g (1.03 lb)
- Installation : DIN-rail mounting, Wall mounting (with optional kit)
Power Parameters
- Input Voltage : 9 to 30 VDC
- Power Connector : 1 removable 3-contact terminal block(s)
- Power Consumption : 11.7 W (max.)
- Reverse Polarity Protection :Supported
Environmental Limits
- Operating Temperature : Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) - Storage Temperature (package included) : -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity : 5 to 95% (non-condensing)
Standards and Certifications
- EMC : EN 61000-6-2/-6-4, EN 55032/24
- EMI : CISPR 22, FCC Part 15B Class A
- EMS : IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF - Radio : EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-1137C, ANATEL, MIC, NCC, SRRC, WPC, KC, RCM
- Road Vehicles : E mark E1
- Safety : EN 60950-1, UL 60950-1
- Vibration : IEC 60068-2-6
MTBF
- Time : 1,125,942 hrs