e1261h-t-iologik.png

E1261H-T IoLogik-Ethernet remote I/O with 2-port Ethernet switch, 12 DIOs, 5 AIs and 3 RTDs

 

Features and Benefits

  • User-definable Modbus/TCP Slave addressing
  • 2-port Ethernet switch for daisy-chain topologies
  • Active communications with MX-AOPC UA Server
  • Easy mass deployment and configuration with ioSearch utility
  • Friendly configuration via web browser
  • Simplify I/O management with MXIO library on either Windows or Linux platform
  • IEC 60945 approval for harsh offshore environments
  • Wide operating temperature range: -40 to 75°C (-40 to 167°F)

 

Rugged Ethernet Remote I/O: The ioLogik E1200H Series for Harsh Environments

 

Industry-Proven Rugged Design

Installation of remote Ethernet I/O in offshore environments is a real challenge. It is critical to find devices properly designed for protected, safe use in these environments. Moxa’s ioLogik E1200H series with IEC 60945 certifications fulfills the need for devices suitable to such demanding industrial applications. Compactly packaged in a metal housing, this rugged hardware keeps operating in temperatures ranging from -40 to 75°C, meeting the stringent demands of IEC 60945 for harsh offshore applications.

 

Daisy-Chain Topology Reduces Deployment Costs

Thanks to its two embedded Ethernet switch ports, the ioLogik E1200H remote Ethernet I/O allows you to create daisy-chain topologies for easy cabling. In distributed Ethernet data acquisition applications, panels, units, and cabinets are often located at remote sites where space is limited. The daisy-chain capability of the ioLogik E1200H series allows ioLogik E1200H units to connect in series either to each other or to other nearby Ethernet devices, drastically saving on both space and wiring costs.

 

 

 

Application: Offshore Remote Monitoring

Have you ever wondered where to find a rugged remote Ethernet I/O device to offshore facilities? You need something with the ability to withstand extreme weather conditions, wide temperature changes and that can be used in hazardous environments. With Moxa’s ioLogik E1200H, you get a robust design that will meet your most stringent demands, ensuring your remote data acquisition remains reliable, consistent, and safe.

 

ioLogik E1261H Specifications
• Inputs and Outputs
Configurable DIOs (by software) 12 channels
Analog Inputs 5 channels
RTDs 3 channels
Isolation 3k VDC or 2k Vrms
• Digital Input
Sensor Type Wet Contact (NPN or PNP), Dry Contact
I/O Mode DI or Event Counter (channels 0 to 3)
Dry Contact • On: short to GND
• Off: open
Wet Contact (DI to GND) • On: 0 to 3 VDC
• Off: 10 to 30 VDC
Common Type 12 points per COM
Counter Frequency 250 Hz
Digital Filtering Time Interval Software Configurable
• Digital Output
Type Sink
I/O Mode DO or Pulse Output (channels 0 to 3)
Pulse Output Frequency 500 Hz
Over-Voltage Protection 45 VDC
Over-Current Protection 2.6 A (4 channels @ 650 mA)
Over-Temperature Shutdown 175°C (typical), 150°C (min.)
Current Rating 200 mA per channel
• Analog Input
Type Differential input
Resolution 16 bits
I/O Mode Voltage / Current (software selectable)
Input Range 0 to 10 V, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection)
Accuracy • ±0.5% FSR @ 25°C
• ±1.0% FSR @ -40 and 75°
Sampling Rate (all channels) • All channels: 12 samples/sec
• Per channel: 1.5 samples/sec
Input Impedance 10 mega-ohms (min.)
Built-in Resistor for Current Input 120 ohms
• RTDs
Sensor Type PT100 ( -200 to 850°C)
Input Connection 2- or 3-wire
Sampling Rate • All channels: 12 samples/sec
• Per channel: 1.5 samples/sec
Resolution 0.5°C
Accuracy • ±0.5% FSR @ 25°C
• ±1.0% FSR @ -40 and 75°C
Input Impedance 625 kilo-ohms
• Power Requirements
Input Voltage 12 to 48 VDC
Input Current 235 mA @ 24 VDC
• Physical Characteristics
Dimensions 140 x 113 x 36.3 mm (5.51 x 4.45 x 1.43 in)
Weight 825 g (1.82 lb)
• MTBF (mean time between failures)
Time 296,094 hrs
Standard Telcordia SR332
 
Common Specifications
• LAN
Ethernet 2 switched 10/100 Mbps RJ45 ports
Protection 1.5 kV magnetic isolation
Protocols Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, HTTP
• Serial
Interface 1 RS-232/422/485 (software selectable) DB9 male port
Parity None
Data Bits 8
Stop Bits 1
Flow Control None
Baudrate 300 to 115200 bps
Protocols Modbus RTU (slave)
• Physical Characteristics
Wiring I/O cable max. 14 AWG
Mounting DIN rail (standard), wall (with optional kit)
• Environmental Limits
Operating Temperature -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Altitude Up to 2000 m 
Note: Please contact Moxa if you require products guaranteed to function
properly at higher altitudes.
• Standards and Certifications
Safety UL 508
EMC EN 55032/24, EN 61000-6-2/6-4
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8
Maritime IEC 60945
Green Product RoHS, CRoHS, WEEE
Note: Please check Moxa’s website for the most up-to-date certification status.
• Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty